ABB Fronius TPS 320i Applications Manual Download Page 27

Page: 27 / 88

2.4 Best practice

Installation and setup workflow

1 Install a system with the add-in.

2 Start the RS add-in and connect to the welder.

3 Edit and manage data in the welder via the browser.

4 Edit what should be transferred to the controller.

5 Transfer the data to the controller.

6 Create a weld program.

7 Step through the program and use the Fronius weld editor to edit/tune the

data.

8 Run the program and watch the run-time data in the weld info widget.

Data editor workflow

The

Use weld phase mode

checkbox is global. If it is checked in one tab, it will be

checked on the other tabs as well.

It should be used if the weld tab jobs/synergic lines are wanted for the other tabs.

Application manual - Fronius TPS 320i/400i/500i/600i with RI-FB inside/i interface

3HAC065012-001 Revision: C

2 Installation

2.4 Best practice

Summary of Contents for Fronius TPS 320i

























































































Search results

Summary of Contents for Fronius TPS 320i

Reviews:

Related manuals for Fronius TPS 320i

Brands by name

Popular brands

ABB Fronius TPS 320i, Applications Manual

Search results

Summary of Contents for Fronius TPS 320i

Reviews:

Related manuals for Fronius TPS 320i

Brands by name

Popular brands