ABB Fronius TPS 320i, Applications Manual

Page: 48 / 88

Weld parameters
Tap the Weld tab to view or modify heat phase parameters.
Note
The weld phase parameters can only be modified in manual mode.
xx1900002411
Description Button
The blue refresh button is used to return to the Weld Phase tab. Refresh
The green check button is used to confirm any changes made. Confirm
The red cancel button is used to cancel any changes made and return
to the previous values. Cancel
Description Parameter
The speed of the TCP of the welding torch during the weld in-
struction. Weld speed
The job (schedule) that should be selected within the welder. Job number
The information displayed in the Job number is:
Job number, Job name.
The process type that is active for the selected job. ProcessType
Available process types are:
• MIG/MAG Pulse Synergic
• MIG/MAG Standard Synergic
• MIG/MAG PMC
• MIG/MAG LSC
• MIG/MAG Standard Manual
• Electrode
• TIG
Continues on next page
48 Application manual - Fronius TPS 320i/400i/500i/600i with RI-FB inside/i interface
3HAC065012-001 Revision: C
© Copyright 2004-2021 ABB. All rights reserved.
4 Weld editor interface
4.3 Weld editor in Job mode
Continued