QUIZBOT ASSEMBLY
Parts Required:
● 2 Servos
● 1 1Arm Servo Horn
● 1 2Arm Servo Horn
● 2 Servo Holders (3D Printed)
● 1 Face Piece (3D Printed)
Tools & Additional Materials:
● Hot Glue Gun
● Hot Glue
Step 1: Attach Servo Horns
Use a small amount of hot glue to attach 2Arm Servo horn to one of the Servo Holders
Use a small amount of hot glue to attach 1Arm Servo horn to Face Piece
Step 2: Thread servo wires through Servo Holders
The contacts (metal pieces) should be facing up when you thread the wires through.
