ABB Conceptpower DPA 500 Operating Manual Download Page 69

Page: 69 / 114

Modifications reserved

Page 69/94

7.3

Deep battery test

The battery test takes approx. 3 minutes and should be performed only if:

•

There are no alarm conditions

•

The battery is fully charged

•

Mains is present.

The battery testing can be carried out independently of the operation mode (OFF-LINE or ON-LINE)

and whether or not the load is connected. The battery test procedure can be performed from the UPS

display, in the service setup mode.

7.4

Battery maintenance, disposal and recycling

The battery maintenance shall be done by a certified

Service Partner.

To ensure an optimum operation of the UPS system and
a continuous and efficient protection of the connected

load it is recommended to check the batteries every 12

months.

Batteries contain dangerous substances that will harm

the environment if thrown away. If you change the

batteries yourself, call qualified organizations for battery

disposal and recycling.

Summary of Contents for Conceptpower DPA 500














































































































Search results

Summary of Contents for Conceptpower DPA 500

Reviews:

Related manuals for Conceptpower DPA 500

Brands by name

Popular brands

ABB Conceptpower DPA 500, Operating Manual

Search results

Summary of Contents for Conceptpower DPA 500

Reviews:

Related manuals for Conceptpower DPA 500

Brands by name

Popular brands