ABB Conceptpower DPA 500 Operating Manual Download Page 49

Page: 49 / 114

Modifications reserved

Page 49/94

6.4.8

Operating mode

6.4.8.1

Online mode (Inverter mode)

The

Online mode

is the UPS operating mode in which the load is supplied through the

rectifier

and

the

inverter

Figure 21: Online mode on Mimic Diagram

The

Online mode

provides the highest degree of protection, especially in the event of a mains

disturbance or failure.

This operating mode is always recommended if the critical loads will not tolerate any interruption of

the supply (not even the shortest).
In the unlikely event of an inverter fault or overload condition the UPS will transfer the load

automatically and without interruption to the static bypass-mains supply (transfer time = 0ms).

6.4.8.2

Xtra VFI operating mode

Xtra VFI is a complementary operating mode to the online mode. Please refer to the

Appendix A

for full

description.

6.4.8.3

Eco mode (Offline or bypass mode)

Eco mode

, the load is supplied from the mains through the static bypass.

Figure 22: Eco mode on Mimic Diagram

Summary of Contents for Conceptpower DPA 500














































































































Search results

Summary of Contents for Conceptpower DPA 500

Reviews:

Related manuals for Conceptpower DPA 500

Brands by name

Popular brands

ABB Conceptpower DPA 500, Operating Manual

Search results

Summary of Contents for Conceptpower DPA 500

Reviews:

Related manuals for Conceptpower DPA 500

Brands by name

Popular brands