Appendix A – Technical Data
ACA 635 IGBT Supply Sections
A-13
CE Marking
A CE mark is attached to ACS 600 MultiDrive frequency converters (380...690 V
ranges) to verify that the unit fulfils the European Low Voltage and EMC Directives
(Directive 73/23/EEC, as amended by 93/68/EEC and Directive 89/336/EEC, as
amended by 93/68/EEC).
Compliance with the
EMC Directive
EMC stands for
E
lectro
m
agnetic
C
ompatibility. It is the ability of electrical/electronic
equipment to operate without problems within an electromagnetic environment.
Likewise, the equipment must not disturb or interfere with any other product or system
within its locality.
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used in the European Economic Area. The EMC product standard EN
61800-3 covers the requirements stated for frequency converters.
The ACS 600 MultiDrive frequency converters comply with the EMC Directive in
industrial low-voltage network, and IT networks (unearthed mains) with the following
provisions.
Industrial Low-Voltage
Network
1. It is ensured that no excessive emission is propagated to neighbouring low-
voltage networks. In some cases, the natural suppression in transformers and
cables is sufficient. If in doubt, the supply transformer with static screening
between the primary and secondary windings can be used.
2. The ACS 600 MultiDrive is installed according to the instructions given in the
Hardware Manual
(EN code 63700118).
3. The motor and control cables are selected as specified in the
Hardware Manual
(EN code 63700118).
Note:
The ACA 635 must not be equipped with the EMC filtering.
Table A-1
The EMC filtering of the ACx 600 units is marked in the type code as
follows. * du/dt F EMC Filters, ** du/dt F No EMC Filters, *** EMC Cabinet
with EMC Filters.
ACS 600 Type
Type Code
Character no.
EMC Filter
Selections
No EMC Filter
Selections
ACS 600 MultiDrive
Supply Section
ACA63xxxxxxxxxxxxx...
16
1, 2***
0
Drive Section
ACA610xxxxxxxxxxxx...
16
1
0
Summary of Contents for ACS 600 MultiDrive
