Chapter 8 – Parameters
ACA 635 IGBT Supply Sections
8-25
98 Option Modules
Code Parameter
T
y
p
e
Default
Alternative
Settings
( ) Fieldbus
Equivalent
Description
98
OPTION
MODULES
98.01
COMMAND SEL
B I/O
This parameter selects the control command
interface(s).
(0)
MCW
The ISU control program reads the control commands
via a serial link and through the digital input terminals.
(1)
I/O
The ISU control program reads the control commands
through the digital input terminals.
98.02
COMM MODULE
I
NO
This parameter defines the control mode and place in
the REMOTE mode.
(1)
NO
The drive is controlled using I/O: DI2
(2)
FBA DSET1
The drive is controlled through the communication link
(CH0) using datasets 1 and 2. This is a typical setting
for use with a fieldbus adapter module.
(3)
FBA DSET10
The drive is controlled through the communication link
(CH0) using datasets 10 to 33. (for example APC2,
AC 70, AC80, NPBA-02, NCSA-01)
(4)
INVERTER
Not in use
Summary of Contents for ACS 600 MultiDrive
