ABB ACQ80-04 Series, Hardware Manual

Page: 21 / 170

See Task
ACQ80-04 standard control pro-
gram firmware manual
(3AXD50000170654 [English])
Commission the drive
Terms and abbreviations
Description Term/
Abbreviation
Assistant control panel ACS-AP-x
Basic control panel ACS-BP-S
Optional I/O extension module underneath the fieldbus adapter module BIO-01
Circuit board in which the control program runs Control board
DC circuit between rectifier and inverter DC link
Energy storage which stabilizes the intermediate circuit DC voltage DC link capacit-
ors
Digital input DI
Optional mounting platform for door mounting of control panel DPMP
Mounting platform for control panel (flush mounting) DPMP-01
Frequency converter for controlling AC motors Drive
Embedded fieldbus EFB
Fieldbus adapter FBA
Optional CANopen adapter module FCAN
Optional EtherCAT adapter module FECA-01
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols FENA-11
Optional Ethernet adapter module for EtherNet/IP™, Modbus TCP and PROFINET IO protocols,
2-port FENA-21
Optional PROFIBUS DP adapter module FPBA-01
Physical size of the drive or power module Frame, frame
size
Optional RS-485 (Modbus/RTU) adapter FSCA-01
Insulated gate bipolar transistor IGBT
DC circuit between rectifier and inverter Intermediate
circuit
Converts direct current and voltage to alternating current and voltage. Inverter
A pre-defined set of default values of parameters in a drive control program. Macro
Remote monitoring tool NETA-21
With fieldbus protocols based on the Common Industrial Protocol (CIPTM), such as DeviceNet
and Ethernet/IP, denotes the control of the drive using the Net Ctrl and Net Ref objects of the
ODVA AC/DC Drive Profile. For more information, see www.odva.org. Network control
In the drive control program, user-adjustable operation instruction to the drive, or signal
measured or calculated by the drive.
In some (for example fieldbus) contexts, a value that can be accessed as an object, eg, variable,
constant, or signal. Parameter
Programmable logic controller PLC
Converts alternating current and voltage to direct current and voltage Rectifier
Safe torque off (IEC/EN 61800-5-2) STO
Introduction to the manual 21