ABB ACQ80-04 Series, Firmware Manual

Page: 118 / 270

118 Parameters
Hysteresis Action is taken whenever the signal falls below its (hysteresis)
low limit or rises above its (hysteresis) high limit. 7
32.36 Supervision 4
action Selects whether the drive generates a fault, warning or
neither when the value monitored by signal supervision 4
exceeds its limits.
Note: This parameter does not affect the status indicated by
32.01 Supervision status .
No action
No action No warning or fault generated. 0
Warning Warning A8B3 Signal supervision 4 is generated. 1
Fault Drive trips on fault 80B3 Signal supervision 4 . 2
Fault if running Drive trips on fault 80B0 Signal supervision 1 if the motor is
running.
3
32.37 Supervision 4
signal Selects the signal to be monitored by signal supervision
function 4.
For the available selections, see parameter
32.07
Supervision 1 signal .
Zero
32.38 Supervision 4 filter
time Defines a filter time constant for the signal monitored by
signal supervision 4. 0.000 s
0.000 … 30.000 s Signal filter time. 1000 = 1 s
32.39 Supervision 4 low Defines the lower limit for signal supervision 4. 0.00
-21474836.00…
21474836.00 Low limit. -
32.40 Supervision 4 high Defines the upper limit for signal supervision 4. 0.00
-21474836.00…
21474836.00 Upper limit. -
32.41 Supervision 4
hysteresis Defines the hysteresis for the signal monitored by signal
supervision 4. 0.00
0.00…100000.00 Hysteresis. -
32.45 Supervision 5
function Selects the mode of signal supervision function 5. Determines
how the monitored signal (see parameter
32.47 ) is compared
to its lower and upper limits ( 32.49 and 32.40 respectively).
The action to be taken when the condition is fulfilled is
selected by
32.46 .
Disabled
Disabled Signal supervision 5 not in use. 0
Low Action is taken whenever the signal falls below its lower limit. 1
High Action is taken whenever the signal rises above its upper
limit. 2
Abs low Action is taken whenever the absolute value of the signal falls
below its (absolute) lower limit. 3
Abs high Action is taken whenever the absolute value of the signal
rises above its (absolute) upper limit. 4
Both Action is taken whenever the signal falls below its low limit or
rises above its high limit. 5
Abs both Action is taken whenever the absolute value of the signal falls
below its (absolute) low limit or rises above its (absolute) high
limit. 6
Hysteresis Action is taken whenever the signal falls below its (hysteresis)
low limit or rises above its (hysteresis) high limit. 7
No. Name/Value Description Def/FbEq16
ACQ80 FW.book Page 118 Thursday, February 14, 2019 11:33 AM