
104 Parameters
Defines the minimum allowed frequency.
WARNING!
This value must not be higher than
WARNING!
in frequency control mode only.
-300.00 Hz
-500.00…500.00
Hz
Minimum frequency.
10 = 1
Defines the maximum allowed frequency.
WARNING!
This value must not be lower than
.
WARNING!
In frequency control mode only.
300.00 Hz
-500.00…500.00
Hz
Maximum frequency.
10 = 1
Defines the maximum allowed drive current.
3.24 A
0.00…3.24 A
Maximum drive current.
1 = 1 A
Defines a minimum torque limit for the drive (in percent of
nominal motor torque).
-300.0%
-1600.0…0.0%
Minimum torque limit 1.
10 = 1
Defines a maximum torque limit for the drive (in percent of
nominal motor torque).
300.0%
0.0…1600.0%
Maximum torque 1.
10 = 1
Enables the undervoltage control of the intermediate DC link.
If the DC voltage drops due to input power cut off, the
undervoltage controller will automatically decrease the motor
torque in order to keep the voltage above the lower limit. By
decreasing the motor torque, the inertia of the load will cause
regeneration back to the drive, keeping the DC link charged
and preventing an undervoltage trip until the motor coasts to
a stop. This will act as a power-loss ride-through functionality
in systems with high inertia, such as a centrifuge or a fan.
Disable
Undervoltage control disabled.
0
Enable
Undervoltage control enabled.
1
Enables/disables temperature-based output current limitation.
The limitation should only be disabled if required by the
application.
Disable
Thermal current limitation disabled.
0
Enable
Thermal current limitation enabled.
1
No.
Name/Value
Description
Def/FbEq16
ACQ80 FW.book Page 104 Thursday, February 14, 2019 11:33 AM
Summary of Contents for ACQ80-04 Series
