ABB ACQ80-04 Series, Firmware Manual

Page: 114 / 270

114 Parameters
32
32 Supervision Configuration of signal supervision functions 1…6.
Six values can be chosen to be monitored; a warning or fault
is generated whenever predefined limits are exceeded.
See also section
Signal supervision (page 49 ).
32.01 Supervision status Signal supervision status word.
Indicates whether the values monitored by the signal
supervision functions are within or outside their respective
limits.
Note: This word is independent of the drive actions defined
by parameters 32.06 , 32.16 , 32.26 , 32.36 , 32.46 and 32.56 .
0b000
0b0000…0b1111 Signal supervision status word. 1 = 1
32.05 Supervision 1
function Selects the mode of signal supervision function 1. Determines
how the monitored signal (see parameter
32.07 ) is compared
to its lower and upper limits ( 32.09 and 32.10 respectively).
The action to be taken when the condition is fulfilled is
selected by
32.06 .
Disabled
Disabled Signal supervision 1 not in use. 0
Low Action is taken whenever the signal falls below its lower limit. 1
High Action is taken whenever the signal rises above its upper
limit. 2
Abs low Action is taken whenever the absolute value of the signal falls
below its (absolute) lower limit. 3
Abs high Action is taken whenever the absolute value of the signal
rises above its (absolute) upper limit. 4
Both Action is taken whenever the signal falls below its low limit or
rises above its high limit. 5
Abs both Action is taken whenever the absolute value of the signal falls
below its (absolute) low limit or rises above its (absolute) high
limit. 6
Hysteresis Action is taken whenever the signal falls below its (hysteresis)
low limit or rises above its (hysteresis) high limit. 7
32.06 Supervision 1
action Selects whether the drive generates a fault, warning or
neither when the value monitored by signal supervision 1
exceeds its limits.
Note: This parameter does not affect the status indicated by
32.01 Supervision status .
No action
No action No warning or fault generated. 0
Warning Warning A8B0 Signal supervision 1 is generated. 1
Fault Drive trips on fault 80B0 Signal supervision 1 . 2
No. Name/Value Description Def/FbEq16
Bit Name Description
0 Supervision 1 active 1 = Signal selected by 32.07 is outside its limits.
1 Supervision 2 active 1 = Signal selected by 32.17 is outside its limits.
2 Supervision 3 active 1 = Signal selected by 32.27 is outside its limits.
3 Supervision 4 active 1 = Signal selected by 32.37 is outside its limits.
4 Supervision 5 active 1 = Signal selected by 32.47 is outside its limits.
5 Supervision 6 active 1 = Signal selected by 32.27 is outside its limits.
6…15 Reserved
ACQ80 FW.book Page 114 Thursday, February 14, 2019 11:33 AM