
Program features 49
Diagnostics
Signal supervision
Six signals can be selected to be supervised by this function. Whenever a supervised
signal exceeds or falls below predefined limits, a bit in
is
activated, and a warning or fault generated.
For example, if user wants to monitor DC voltage and generate a warning/fault
message if it exceeds certain limit, he/she can select DC Voltage [7] in the parameter
, set low/high limit in the parameter
/
and set
.
The supervised signal is low-pass filtered.
Settings
(page
Diagnostics menu
The
Diagnostics
menu provides quick information about active faults, warnings, fault
history and I/O connection status. It also helps you to find out why the drive is not
starting, stopping or running as desired.
• Active faults
: Displays currently active faults. For information on the fault
codes, see list of
on page
• Fault history
: Displays the fault history. For information on the fault codes, see
on page
.
• Active warnings
: Displays currently active warnings. For information on the
on page
• I/O status
: Displays currently active I/O settings.
Settings
Menu
→
Diagnostics
Load analyzer
Peak value logger
The user can select a signal to be monitored by a peak value logger. The logger
records the peak value of the signal along with the time the peak occurred, as well as
motor current, DC voltage and motor speed at the time of the peak. The peak value is
sampled at 2 ms intervals.
Amplitude loggers
The control program has two amplitude loggers.
0
0
ACQ80 FW.book Page 49 Thursday, February 14, 2019 11:33 AM
Summary of Contents for ACQ80-04 Series
