ABB AC-AP Series User Manual Download Page 54

Page: 54 / 74

54 Control of multiple drives

Selecting drive menu

In the

Options

menu, select

Select drive

which lists all the drives connected to the
panel bus and shows their current status. If
panel bus is not enabled, only one drive is
shown.

In the panel bus, If the connection to the
currently selected drive fails,

Select drive

menu is shown with the other drive list.

In the

Select drive

menu, any drives to which the connection is lost are shown in

dimmed text.



Selecting a drive

If there are multiple drives connected to the same panel bus, you can select which
drive to control with the control panel.
1. In the

Options

menu, select

Select drive

to open a list of connected drives.

2. Use

and

to move the cursor. When a drive is highlighted, the green LED on

the drive blinks for one second.

3. Press

(

Select

) to change control to the highlighted drive.

Panel features with multiple drives



Panel views

In a panel bus configuration, the control panel communicates with one drive at a time.
Any information shown on the control panel, such as the status bar or signals in the

Home

view pertain to the currently selected drive. Similarly, the control panel stores

data to its memory only from the currently selected drive.

Changes to the

Home

view configuration and any parameter changes are saved in

the drive. They can be transferred to other drives using the backup feature.

You can view information on other drives in the panel bus and switch to another drive
in the

Select drive

menu.



The Help page

The content of the Help page is drive-specific, and it always refers to the currently
selected drive.

Summary of Contents for AC-AP Series









































































Search results

Summary of Contents for AC-AP Series

Reviews:

Related manuals for AC-AP Series

Brands by name

Popular brands

ABB AC-AP Series, User Manual

Search results

Summary of Contents for AC-AP Series

Reviews:

Related manuals for AC-AP Series

Brands by name

Popular brands