ABB AC-AP Series, User Manual

Page: 71 / 74

Technical data 71
FCC and Industry Canada certifications
The following FCC and Industry Canada certifications compliance identification
numbers are valid for ACS-AP-W and ACH-AP-W panels and Bluetooth.
• FCC ID: 2AFNGAPWSERIES
• IC: 20555-APWSERIES

FCC ID: 2AFNGAPWSERIES
The ACS-AP-W and ACH-AP-W wireless assistant control panels comply with part 15
of the FCC rules.
The operation is subject to the following two conditions:
1. The device may not cause harmful interference, and
2. The device must accept any interference received, including interference that
may cause undesired operation.
Note:
• The wireless panels are tested and found to comply with the limits of a Class A
digital device, pursuant to part 15 of the FCC rules. These limits are designed to
provide reasonable protection against harmful interference when the panels are
operated in a commercial environment.
• The wireless panels will generate, use, and radiate radio frequency energy. If the
panels are not installed and used in accordance with the instruction manual, it
may cause harmful interference to radio communications. Operation of these
panels in a residential area is likely to cause harmful interference in which the
user is required to correct the interference at his own expense.
• Modifications not expressly approved by ABB Oy could void the user's authority to
operate the wireless panels.

IC: 20555-APWSERIES
The ACS-AP-W and ACH-AP-W wireless assistant control panels comply with RSS-
247, Issue 1, 2015-05. The operation is subject to the following two conditions:
1. The device may not cause interference, and
2. The device must accept any interference, including interference that may cause
undesired operation of the device.
Son fonctionnement est sujet aux deux conditions suivantes:
1. le dispositif ne doit pas produire de brouillage préjudiciable, et
2. ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible
de provoquer un fonctionnement indésirable.