ABB AC-AP Series User Manual Download Page 65 | Manualshive

Page: 65 / 74

background image

Panel-to-PC USB connection 65

Connecting a PC tool to a drive through the control panel

You can use the control panel to connect an ABB PC tool to the drive. When using the
control panel, you can only access the drive from the PC tool.
1. Install an ABB PC tool to the PC.
2. Connect the control panel to the drive.
3. Connect the control panel to the PC with a USB cable as instructed in

control panel to PC USB

(page

4. If Windows prompts you to install USB drivers, install them as instructed in

Drive

composer user’s manual

(3AUA0000094606 [English]).

The behavior depends on the current control location of the drive. See

Connecting in

local control mode

(page

Connecting in remote control mode

(page



Connecting in local control mode

When you connect the control panel in local control mode to a PC, local control is
transferred to the PC tool and the control panel displays the USB screen. The drive
retains its present reference and direction.

When you have finished using the PC tool, close the connection through the PC tool
first and then disconnect the USB cable. Local control is transferred back to the
control panel and the drive retains its present reference and direction.

Note:

If you disconnect the USB cable before closing the connection, a Local loss

fault is triggered.



Connecting in remote control mode

When you connect the control panel in remote control mode to a PC, the control
panel displays the USB screen and you can only interact with the control panel
through the PC tool. The drive remains in remote control, but you can switch over to
local control using the PC tool.

When you disconnect the PC tool, the control panel exits the USB screen and the
drive resumes its normal operation.

«
...
63
64
65
66
67
...
»

Summary of Contents for AC-AP Series











































































Reviews:

No comments

Related manuals for AC-AP Series

Brand: ABB Pages: 139

Brand: ABB Pages: 28

Brand: ABB Pages: 59

Brand: Eaton Pages: 16

Brand: Harmonic Drive Pages: 25

Brand: Nelson Pages: 8

Brand: Jabra Pages: 8

Brand: M-Audio Pages: 26

Brand: M Climate Pages: 12

Brand: OEM Pages: 8

Brand: ABB Pages: 102

Brand: WAGNER Pages: 128

CentralControl CC41

Brand: Becker Pages: 48

Brand: GSK Pages: 32

Brand: GSD Pages: 5

Brand: Olsen Pages: 4

Brand: Greenheck Pages: 4

Brand: ICP DAS USA Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands