Technical data 67
11
Technical data
What this chapter contains
This chapter contains the technical details of the Assistant control panel.
Connectors
The control panel has the following connectors:
Display
The control panel has a monochrome, 240 x 160 pixel resolution LCD display with
adjustable backlight and display contrast.
(page
).
Connector
Purpose
RJ-45 female
connector
Used for connecting the panel to drive.
• If cable is used, then maximum length should be 100 meters (328 ft.).
• On a panel bus, the combined maximum length of the panel bus
cables should be 100 meters (328 ft.).
• The panel bus can have a maximum of 32 nodes.
Type B mini USB
connector
Used for connecting panel to PC. It is intended for temporary service
use (USB 2.0, MTP protocol). The maximum cable length should be
three meters (9.8 ft.).
DMS documents: 3AXD00000587751,
3AXD10000371905
Summary of Contents for AC-AP Series
