ABB 2CSYK1102C/S, Product Manual

Page: 7 / 42

MYLOS ® Building Automation |
Technical features 7
MYLOS
®
Building Automation
Technical features
2CSYK1106x
1.3 Switch Actuator 8A, 2 switches
The 2-channel 8A Switch Actuator with two switches is a flash-mounted device for the
ABB's Mylos Building Automation system.
On the rear side, the device has a bus connection and two output contacts (NA) that can
be configured for the control of different kinds of loads. These contacts need additional
power supply. The device relays can receive a switching command from the device itself,
from other control devices of the Building Automation system or from conventional control
devices (push-buttons, switches, relays) duly associated with input devices. For each output
it is possible to control the following functions separately:
- Time, delay, ON/OFF functions;
- Stairlights with pre-warning and adjustable time for stairway lighting functions;
- Scene control through 8 bit /1 bit controls
- AND, OR, XOR logic operation and gate function.
On the front side it has two rocker switches with programmable indicator light, that can be
configured separately according to the following functions:
- simple switching or switching with two communication objects
- Dimmer functionality;
- Shutter functionality;
- 1 bit and 8 bit scene functionality;
- manual operation that makes it possible to control the relays directly.
1.3.1 Technical data
Power supply - Operating voltage 21…30 VDC over the bus
- Absorbed power EIB / KNX < 12 mA
Nominal output values - Number of voltage-free contacts 2
- Rated voltage U
n
240/400 VAC (50/60Hz)
- Rated current I
n
(per output) 8A
- Mechanical contacts duration >5*10
7
- Max. number of relay changes
of position per output to the
minimum if all relays are switched
at the same time.
40
Connections - EIB / KNX Connection terminal
Bus 0.6-0.8 mm ø, unipole
- Load circuit Screw terminals
- Connection cable cross section 0,2….2,5 mm
2
braid
0,2….4 mm
2
unipole
- Tightening torque Max. 0.5 Nm
Control and display elements
EIB / KNX - red LED and EIB / KNX button To set the physical address
EIB / KNX voltage - SELV 24 VDC (safety extra low
voltage)
Ambient temperature - Use -5 °C … + 45 °C
- Storage -25 °C … + 55 °C
- Transport -25 °C … + 70 °C
Execution - Dimensions (H x W x D) in mm 17 x W x 15
- Width W in mm 17
- Mounting width in mm 7
- Mounting depth in mm 5
Case, colour
- Plastic container, white or black
CE marking
- acc. to EMC and Low-Voltage
Directives