MYLOS
®
Building Automation |
Technical features 3
MYLOS
®
Building Automation
Technical features
2CSYK1102x
1
Technical features
1.1
Switch Actuator 16A, 1 switch
The one-channel 16A Switch Actuator one switch is a flash-mounted device for the ABB's
Mylos Building Automation system.
On the rear side, the device has an exchange output contact (NA/NC) that can be configured
for the control of different kinds of loads. These contacts need additional power supply. The
device relay can receive a switching command from the device itself, from other control
devices of the Building Automation system or from conventional control devices (push-
buttons, switches, relays) duly associated with input devices of the Building Automation
system. For the simple output it is possible to control the following functions separately:
-
Time, delay, ON/OFF functions;
-
Stairlights with pre-warning and adjustable time for stairway lighting functions;
-
Scene control through 8 bit /1 bit controls
-
AND, OR, XOR logic operation and gate function.
On the front side it has a rocker switch with programmable indicator light, that can be
configured according to the following functions:
-
simple switching or switching with two communication objects
-
Dimmer functionality;
-
Shutter functionality;
-
1 bit and 8 bit scene functionality;
-
manual operation that makes it possible to control the relays directly.
1.1.1 Technical data
Power supply
- Operating voltage
21…30 VDC over the bus
- Absorbed power EIB / KNX
< 12 mA
Nominal output values
- Number of voltage-free contacts 1
- Rated voltage U
n
240/400 VAC (50/60Hz)
- Rated current I
n
(per output)
16A
- Mechanical contacts duration
>5*10
6
- Number of relay changes of
position to the minimum
40
Connections
- EIB / KNX
Connection terminal
Bus 0.6-0.8 mm ø, unipole
- Load circuit
Screw terminals
- Connection cable cross section
0,2….2,5 mm
2
braid
0,2….4 mm
2
unipole
- Tightening torque
Max. 0.5 Nm
Control and display elements
EIB / KNX
- red LED and EIB / KNX button
To set the physical address
EIB / KNX voltage
- SELV 24 VDC (safety extra low
voltage)
Ambient temperature
- Use
-5 °C … + 45 °C
- Storage
-25 °C … + 55 °C
- Transport
-25 °C … + 70 °C
Execution
- Dimensions (H x W x D) in mm
17 x W x 15
- Width W in mm
17
- Mounting width in mm
7
- Mounting depth in mm
5
Case, colour
- Plastic container, white or black
CE marking
- acc. to EMC and Low-Voltage
Directives
