24 Commissioning
| MYLOS
®
Building Automation
MYLOS
®
Building Automation
Commissioning
2.7.2 Rocker switch 2 switching objects
Upper Rocker switch operation
It defines the operating mode if the upper rocker switch is pressed.
Upper push-button cyclic sending
This parameter allows you to determine in which cases the cyclic sending should begin (if different from "no").
Base for cyclic repetition: upper push-button (if “Cyclic Sending” is different from no)
Cyclic sending multiplier - upper push-button (if “Cyclic Sending” is different from no)
These two parameters allow you to determine the time period for message cyclic repetition over the bus. Time interval
is calculated as follows: Period for message repetition = Base * Multiplier
Lower rocker switch operation
It defines the operating mode if the lower rocker switch is pressed.
Lower push-button cyclic sending
This parameter allows you to determine in which cases the cyclic sending should begin (if different from "no").
Base for cyclic repetition: lower push-button (if “Cyclic Sending” is different from no)
Cyclic sending multiplier - lower push-button (if “Cyclic Sending” is different from no)
These two parameters allow you to determine the time period for message cyclic repetition over the bus. Time interval
is calculated as follows: Period for message repetition = Base * Multiplier.
Courtesy light activation
This parameter allows you to switch on the courtesy lights.
