34 Operation of communication objects
| MYLOS
®
Building Automation
MYLOS
®
Building Automation
Operation of communication objects
This object will be visible if the time function in the “X: Time” parameter window and a pre-warning object via the
“Pre-warning before stairlight end” parameter are selected. The object value is programmable and gives a pre-
warning before the stairlights are turned off.
For example, during stairlights switching on, until the beginning of pre-warning time, a "0" can be sent to this object
and at the moment of pre-warning a "1" can be sent. In this way it is possible to activate a pre-warning.
6
Logic gate 1
Output A
1 bit (EIS 1) DPT 1.002
C, W
14
Logic gate 1
Output B
1 bit (EIS 1) DPT 1.002
C, W
The object is visible if the logic function has been enabled in the parameter window “X: Function”. The output X
can be assigned to the first of two logic objects. The logic operation should be defined in the parameter window
“X: Logic”.
The communication object is first of all connected to the object “Logic gate 1”. The result is connected to the object
“Logic gate 2”.
An example with chart of operation can be found in section 4.2.3.
7
Logic gate 2
Output A
1 bit (EIS 1) DPT 1.002
C, W
15
Logic gate 2
Output B
1 bit (EIS 1) DPT 1.002
C, W
With this object the output X can be assigned to the second logic function. The logic operation should be defined
in the parameter window “X: Logic”.
The communication object is first of all connected to the object “Logic gate 1”. The result is connected to the object
“Logic gate 2”.
