MYLOS
®
Building Automation |
Commissioning 23
MYLOS
®
Building Automation
Commissioning
2.7
Rocker switch 1/2
2.7.1 Switching Rocker switch
Upper Rocker switch push-button operation
It defines the operating mode if an upper or lower Rocker switch is pressed.
Cyclic sending
This parameter allows you to determine in which cases the cyclic sending should begin (if different from "no").
Base for cyclic repetition (if “Cyclic Sending” is different from no)
Cyclic sending multiplier (if “Cyclic Sending” is different from no)
These two parameters allow you to determine the time period for message cyclic repetition over the bus. Time interval
is calculated as follows: Period for message repetition = Base * Multiplier.
Courtesy light activation
This parameter allows you to switch on the courtesy lights.
LED operating mode
The LEDs can remain always on or always off, they can be controlled by communication objects ("Show communication
object value"), follow the rocker switch direct value ("Show rocker switch object value) or inverted value ("Show
rocker switch object inverted value").
