8
Chapter 2
About Corrigo
Manual Corrigo Ventilation, revision R
Use the up and down arrows to move the cursor in the left edge of the display to the function you
wish to select. Select “Application” and press the right arrow.
Corrigo Vent.131021
Expansion unit 1
Expansion unit 2
Corrigo Vent.140212
Move the cursor to the desired application. Press the right arrow.
Title:
Corrigo Ventilation
3.3
Activate? No
Press ”OK” and change ”No” into ”Yes”. Press ”OK”.
The most recently loaded ventilation application will now be entered into memory. This will take
approx. 30 seconds. The application start screen is displayed.
To change languages, press the right arrow 3 times and then choose a language in the same way you
selected an application.
2.2.1 Additional menu options
System:
Information on the Corrigo model and serial number.
EXOreal version.
MAC address and IP address.
Battery status and memory size.
Memory status and voltage frequency.
Communication:
Communication mode selection.
Serial:
Enables selecting EXOline address, communication speed, port mode and routing span.
TCP/IP:
Enables EXOline address selection and choice of DHCP (Yes/No).
Also enables manual IP address and subnet mask setting before the Corrigo is initiated. Default
Gateway and DNS name is also available under this menu.
Current subnet mask, gateway and DNS name.
Main computer status.
Main computer IP address.
Permit connection to main computer.
TCP port routing to serial port 1 or 2.
Time/Date:
Permits setting the time and date.