manualshive.com logo in svg

AB Regin Corrigo E81D-3, Manual, Page: 12 / 118

Share
Download
AB Regin Corrigo E81D-3 Manual Download Page 12

12 

Chapter 2 

  About Corrigo 

Manual Corrigo Ventilation, revision R 

2.3 Technical data 

 
Protection class  .................................................................................................................. IP20 
Display........................................................ 4 rows of 20 characters. Background illumination. 
LEDs 
   Yellow ....................................................................................................... Settable parameter 
   Red ............................................................................................................... Alarm indication 
Clock .................................................................. Year base 24 hour clock with battery backup.  
                                                                                Automatic summer-/winter-time changeover. 
Operating system .......................................................................................................... EXOreal 
Supply voltage .................................................... 24 V AC ±15%, 50…60 Hz or 21…36 V DC 
Power consumption ........................................ 5 VA, 3 W (DC), model …W: 9 VA, 5 W (DC) 
Dimensions .................................................................... 148x123x60 (WxHxD incl. terminals) 
Casing .......................................................................... Standard Euronorm (8.5 modules wide) 
Mounting ................................................................................................................ On DIN-rail 
Operation 
   Climatic conditions according to IEC 721-3-3 ........................................................ Class 3k5 
   Ambient temperature ..................................................................................................0...50°C 
   Ambient humidity .............................................................................................. Max 95% RH 
   Mechanical requirements according to IEC721-3-3  .............................................. Class 3M3 
   Vibration .......................................................... IEC60068-2-6, Test FC, vibration Sinusoidal 
   Shock ................................................................................................ IEC60068-2-27, Test Ea 
Transport 
   Climatic conditions according to IEC 721-3-2 ........................................................ Class 2k3 
   Ambient temperature .............................................................................................. -20...70°C 
   Ambient humidity .............................................................................................. Max 95% RH 
   Mechanical requirements according to IEC721-3-2  .............................................. Class 2M2 
   Vibration .......................................................... IEC60068-2-6, Test FC, vibration Sinusoidal 
   Shock ................................................................................................ IEC60068-2-27, Test Ea 
   Free fall .............................................................................................IEC60068-2-27, Test Ed 
Storage 
   Climatic conditions according to IEC 721-3-1 ........................................................ Class 1k3 
   Ambient temperature .............................................................................................. -20...70°C 
   Ambient humidity .............................................................................................. Max 95% RH 
 

Battery 

Type .................................................................................... Replaceable Lithium cell, CR2032  
Battery life  ................................................................................................... Better than 5 years 
Warning .................................................................................................... Low battery warning 
Battery backup ............................................................................... Memory and real time clock 

 

Communication 

EXOline Port 1, insulated via a built-in RS485 contact. 
EXOline Port 2, via a built-in RS485 contact. 
EXOline TCP/IP. 
Modbus communication via serial RS485 communication (not TCP/IP). 
BACnet/IP. 
LON serial communication. 
 
Suitable model should be selected for appropriate needs. 

 
EMC emission and immunity standard 

This product conforms to the  requirements of the EMC Directive 2004/108/EC through product 
standards EN 61000-6-1 and EN 61000-6-3. 

RoHS

 

This product conforms to the Directive 2011/65/EU of the European Parliament and of the Council. 

 

 

 

Summary of Contents for Corrigo E81D-3























































































































Reviews:

No comments