Aastra 9143i Series, Administrator'S Manual

Page: 1017 / 1140

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
41-001160-04 Rev 02, Release 2.5 A-231
Parameter –
prgkeyN value
Value
(in Web UI)
Aastra Web UI Operation->Programmable Keys
Configuration Files aastra.cfg, <mac>.cfg
Description This is the value you assign to the programmable key.
The “ prgkeyN value ” parameter can be set for the following softkey types
only:
•
speeddial (you can enter a speeddial number for this field;
optionally, you can also enter a prefix for the
speeddial value to allow the phone to dial the prefix
after you press the speeddial programmable key;
you then enter the rest of the number from the
keypad on the phone.)
• line
• blf
• sprecode
• dcp
• xml
• park
• pickup
• blf/xfer
• speeddial/xfer
• speeddial/conf
• paging
Notes :
1. For speeddial - Value is the phone number, extension, or prefix
number to enter for the programmable key.
2. For line - Value is optional; for example L4.
3. For blf - Value is the extension you want to monitor.
4. For sprecode - Value is dependent on services offered by server.
5. For xml - You can specify a URI to use for this XML softkey. The
variables you can use with the XML softkey URI are:
•
$$SIPUSERNAME$$
• $$SIPAUTHNAME$$
• $$PROXYURL$$
• $$LINESTATE$$
• $$LOCALIP$$
• $$REMOTENUMBER$$
• $$DISPLAYNAME$$
• $$SIPUSERNAME$$
• $$INCOMINGNAME$$
• $$CALLDURATION$$
• $$CALLDIRECTION$
6. For Park, Pickup - For valid values, see Chapter 5, the section,
“Park/Pickup Call Server Configuration Values” on page -241 . For
Park/Pickup examples, see Chapter 5, the section “Examples for
Models with 3-Line LCDs (not applicable to 6751i)” on page -240.
Format String