Aastra 9143i Series, Administrator'S Manual

Page: 64 / 1140

Firmware and Configuration Files
1-44 41-001160-04 Rev 02, Release 2.5
IP Phone Administrator Guide
Installing the Firmware/Configuration Files
The following procedure describes how to install the firmware and configuration
files.
Step Action
1 If DHCP is disabled, manually enter the configuration server’s IP address. For details on manually
setting DHCP, see Chapter 4, the section
“DHCP” on page 4-4 .
2 Copy the firmware file <phone model>.st to the root directory of the configuration server. The IP
phone accepts the new firmware file only if it is different from the firmware currently loaded on the IP
phone.
Note: The <phone model> attribute is the IP phone model (i.e., 9143i.st, 9480i.st, 9480iCT.st,
6730i.st,6731i.st, 51i.st, 53i.st, 55i.st, 57i.st, 57iCT.st).
3 Copy the Aastra configuration files ( aastra.cfg and <mac>.cfg ) to the root directory of the
configuration server.
Note: The <mac> attribute represents the actual MAC address of your phone.
(i.e., 00085D030996.cfg ).
4 Note: Restart the IP phone as described in Chapter 3, “Restarting Your Phone” on page 3-13 .