background image

Operational Features

5-310

41-001160-04 Rev 02, Release 2.5  

IP Phone Administrator Guide

Server to IP Phone Download Behavior

The software that reads directory files from the server, loads the file’s contents 
into the phone's NVRAM when the phone is booting. Directory entries in the 
NVRAM that originate from a server directory file are 'owned' by the server. 

During the boot process both directory files are read, combined into a single list, 
and any duplicate entries are deleted from the list. Any entries in this list that are 
not already in the phone's NVRAM are added to the NVRAM and flagged as 
being owned by the server.

Likewise, any entries in the NVRAM that are owned by the server, but are no 
longer in one of the server's directory files, are removed from the NVRAM. 
Entries made from the IP phone UI are never touched.

Directory List Limitations

The following table indicates the maximum characters for each line and field in 
the Directory List.

Directory List Limitations

Maximum length of a line

255 characters

Maximum length of a name

15 characters

Maximum length of a URI

45 characters

Maximum number directory entries in the NVRAM

200 entries

Maximum number directory entries in the NVRAM 
with the "public" attribute
(6757i CT only)

50 entries

Summary of Contents for 9143i Series





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews: