A&D HV-15KCEP, Instruction Manual

Page: 18 / 48

Page 16 HV/HW-CEP Series
Example
PT
Display and Symbols Description
A
Counting mode (Example)
This mode uses the stored unit mass and counts the
number of articles on the pan. The unit is
.
A
A
A
A
Storing the unit mass for the counting mode (Example)
The unit mass is stored, using 20 pieces of samples.
The zero value means that no articles are on the pan.
A
A
A
A
Storing the unit mass for the counting mode (Example)
The unit mass is stored, using 10 pieces of samples.
Sign "-" means that something is placed on the pan.
A
A
A
A
Function settings (Example)
- Press the
MODE
key to select the item, and then press
the
ENTER
key to finalize the selection.
- Enter a parameter using the numerical keypad.
- Press the
ENTER
key to store the new parameters.
A
A
A
A
A
While preset tare setting (Example)
- Enter a setting value using the numerical keypad.
- Press the
ENTER
key to store the new tare.
A
A
A
A
Hold display (Example)
The hold display is set using
Hold
of the function table.
When the weight value is "Near zero" (within the zero
band) or changes more than 25% +30 digits, the hold is
canceled.
A
A
A
A
Weighing error
Check the base unit and the weighing pan.
A
A
A
A
Overload display
Remove anything that is on the pan.
A
A
A
A
Calibration error
The calibration mass is too light.
Check the base unit and the weighing pan.
A
A
A
A
The "digit" is a unit of display, and is equivalent to the minimum measurable mass.
The "Near zero" or zero band is within
± 4 digits from zero point in the unit of kg.
Parameter Item