Aalborg DPC, Operating Manual

Page: 91 / 128

87
COMMAND
NAME
DESCRIPTION
No.
COMMAND SYNT
AX
Command
Argument 1
Argument 2
Argument 3
Argument 4
Response
Diagnostic Events Registers
Read/Set/Reset current value of the Diagnostic Events Registers Status Register: (Read/Reset) Mask Register: (R/W) Latch Register: (R/W) See list of the Diagnostic Events below: 0 CPU_TEMP_HIGH 0x0001 1 DP EE INIT ERROR
0x0002
2 AP EE INIT ERROR 0x0004 3 VREF_OUT_OF_RANGE
0x0008
4 FLOW ABOVE LIMIT 0x0010 5 AP OUT OF RANGE
0x0020
6 G TEMP OUT OF RANGE
0x0040
7 ANALOG OUT ALARM 0x0080 8
SER
COMM
FAILURE
0x0100
9 MB COMM F
AILURE
0x0200
A EEPROM F
AILURE
0x0400
B AUTOZERO F
AILURE
0x0800
C AP T
ARE F
AILURE 0x1000
D DP PRESSURE INV
ALID
0x2000
E AP PRESSURE INV
ALID 0x4000
F F
A
TAL_ERROR 0x8000
6
D
E
NO ARGUMENT (read Diagnostic Events status register)
DE:<V
alue>
Example: DE:0x0
R (reset Diagnostic Events status register to 0x0000)
DER:0x0
M (Read/Set Diagnostic Events Mask register)
NO ARGUMENT (read current settings)
DEM:0x1
<V
alue>
0x0000-0x0FFF Set new value NOTE: all 6 characters are required
DEM:0x101
L (Read/Set Diagnostic Events Latch register)
NO ARGUMENT (read current settings)
DEL:0x1
<V
alue>
0x0000-0x0FFF Set new value NOTE: all 6 characters are required
DEL:0x101