40
Enter Mixture Name:
MyM i x 1
------------
Use
to Change Case
Press Ent When Done
By default, the instrument has no preset mixtures in the memory, and there is room for 20
user-defi ned mixtures (see
Figure 21
). Press the joystick equivalent of an
Ent
button to
assign a name to the new gas mixture (see
Figure 22
). The fl ashing cursor with letter “A”
will appear. Move the joystick
UP
and
DN
to change letters and numbers. Once the desired
letter (or number) is set, use the joystick
RIGHT
command to move the cursor to the next
position. Use
LEFT
to toggle the letter case. Press the joystick equivalent of
Ent
to save the
gas mixture name.
Figure 23:
Add Gas Component and Ratio
MyMix1 G:0 Tot: 0.00%
G1
0.00%
G2
0.00%
G3
0.00%
G4
0.00%
G5
0.00%
Save, Esc to Exit
Figure 22:
Assigning a Name to the Mixture
Once the gas mixture name is saved, the screen shown in
Figure 23
will appear. To select
the gas component for G1, press the joystick equivalent of an
Ent
button. As shown in
Figure 24
, a screen with a list of gases will appear.
NOTE: Use the joystick
Up
and
Down
to select another component, and
Right
and
Left
to switch between Gas Name and Ratio entry.
G:AIR
Air
Ar Argon
CO2 Carbon Dioxide
N2 Nitrogen
O2 Oxygen
He Helium
CO Carbon Monoxide
Figure 24:
Selecting Gas Component
Summary of Contents for DPC
Page 6: ...2...
Page 120: ...116 APPENDIX I COMPONENT DIAGRAM Top Component Side...
Page 121: ...117 Bottom Component Side...
