2.
Place strapping tape from one side of the box to the other directly over the bookmark, staying on its centerline. Fold
both exposed parts of the bookmark over the tape.
5.1 Box Preparation
OPERATION
19
1.
Make sure the box being delivered fits within the landing gear of the drone and is within the weight limitations
of the drone and RDS2 winch. Place a card stock A2Z bookmark (can be found in the accessories box that comes
with the RDS2) just above the centerline of the box (this may have to be adjusted slightly due to where the CG of
the payload is located.)
For larger boxes, it is highly
recommended to run two strips of
tape on each side from the front to
back, adding extra reinforcement to
the strip of tape laid down
previously.
Summary of Contents for RDS2
Page 1: ...RDS2 USER MANUAL ...
