HARDWARE INSTALLATION - DJI M600
34
7.1 Hardware Installation
1.
Locate the top of the M600 Pro, and with a 2.5mm hex driver, remove the 4 screws. Remove the 2 screws
holding on the front GPS unit and mount. Remove the top cover. Be careful, as the fan wire will be attached.
Place the cover/front GPS to the side on the frame, just so it is out of the way of the A3 unit.
3.
From under the main frame of the M600 Pro, slightly pull down the front of the bottom plastic cover in order to
easily access the frame opening. Take the side of the A3 Pro API Port Cable with the black and white wires
located on the outside of the plug and push it up through the opening.
IT IS EXTREMELY IMPORTANT TO PUSH
THE CORRECT SIDE OF THE A3 PRO API PORT CABLE UP THROUGH THE FRAME.
2.
Remove the gimbal mounting kit and any gimbals/sensors from the M600 Pro.
Summary of Contents for RDS2
Page 1: ...RDS2 USER MANUAL ...
