A2A Simulations BONANZA ACCU-SIM V35B, Manual

Page: 106 / 112

108
A2A SIMULATIONS ::: ACCU-SIM V35B BONANZA www.a2asimulations.com
2D PANELS
FOR SIMULATION USE ONLY
Pilot’s Map (Shift 5)
The pilot’s map gives full and
easy access to information that
may be found on real maps,
and allows this information to
be accessed from the cockpit,
as opposed to using the default
map via the drop-down menus.
The accompanying panel to
the map allows you to select
what information you want
to have displayed on the map,
from a compass rose to low
altitude airways.
Also note that some of the
button selections have an
increasing amount of informa-
tion presented with each subse-
quent button press.
For example, the APT
(Airport) button will show the
following information:
• APT 1: Airport ID.
• APT 2: Airport name.
• APT 3: Airport elevation.
• APT 4: Airport radio
frequencies.
Quick Radios (Shift 6)
This small popup panel provides input
for your virtual cockpit radios but in
a simplified and easy to use manner.
This popup features all the amenities of
the actual radios but in a singular unit
which allows you to control your com-
munication, navigation, ADF and tran-
sponder radios from a single source.
Payload and Fuel Manager (Shift 4)
The payload and fuel manager not only gives you
an overview of your current payload, fuel and
oil quantities, it is also an interactive loading
screen, where you can:
• Add and remove passengers and baggage.
• Increase or decrease pilot, pas-
senger and baggage weights.
• Fill engine oil
• Add or remove fuel from the wing tanks.
• Change between viewing weights and
measures in imperial or metric format.
• View, at a glance, total aircraft weight,
payload weight, and total fuel quantities.