A. Menarini Diagnostics Glucomen LX PLUS User Manual Download

Page: 20 / 64

GlucoMen LX PLUS - 42338 - 09/10

4. SETTING THE TIME, DATE, MARKERS AND BEEPER

Your GlucoMen® LX PLUS meter is preset with time and date.

Having the correct time and date of each blood test result helps you and your healthcare professional track

changes in your therapy. It is important to check the correct time and date so you have records of when you

tested. In case time and date are not set, all blood monitoring results will be marked and will not be included

in averages.

Your GlucoMen® LX PLUS meter offers a beeper function that is preset “ON”. This tells you when enough

blood is applied to the sensor, when test is completed and prompts you through other steps in using your

meter.

a. Press the Mode button for longer than 3 seconds. The meter, if in SLEEP Mode, wakes up, displays all

segments for 3 seconds and enters the SETUP Mode.

Summary of Contents for Glucomen LX PLUS

































































Search results

Summary of Contents for Glucomen LX PLUS

Reviews:

Related manuals for Glucomen LX PLUS

Brands by name

Popular brands

A. Menarini Diagnostics Glucomen LX PLUS, User Manual

Search results

Summary of Contents for Glucomen LX PLUS

Reviews:

Related manuals for Glucomen LX PLUS

Brands by name

Popular brands