manualshive.com logo in svg

A. Menarini Diagnostics Glucomen LX PLUS, User Manual

Share
Download
A. Menarini Diagnostics Glucomen LX PLUS User Manual Download Page 48

48

GlucoMen LX PLUS - 42338 - 09/10

UK

This section addresses the messages that appear on your displays, what they mean and what action you 

need to take.

Display

What it Means

What to Do

System Check. Verifies that all segments 

are working. Appears when: 

• Meter is turned on for SETUP Mode and 

DATA REVIEW Mode.

• Sensor is inserted into the meter.

No action required. If all segments are 

not displayed on meter, call 

A. Menarini Diagnostics for assistance:

 

(UK) 0800 243667

(Republic of Ireland) 1800 709903

(Northern Ireland) 0800 7837286

Blood Drop Symbol: meter is ready to 

accept blood.

Apply a blood sample to the sensor. 

Refer to how to run a blood sample.

Countdown screen: 4 seconds for 

glucose and 10 seconds for β-ketone to 

perform the test and calculate the result.

No action required.

A blood glucose test result in mmol/L.

No action required.

Result is automatically stored into 

memory.

11. DISPLAYS, MEANINGS, ACTIONS

11. DISPLAYS, MEANINGS, ACTIONS

Summary of Contents for Glucomen LX PLUS

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands