manualshive.com logo in svg

A. Menarini Diagnostics Glucomen LX PLUS, User Manual

Share
Download
A. Menarini Diagnostics Glucomen LX PLUS User Manual Download Page 13

13

GlucoMen LX PLUS - 42338 - 09/10

UK

3. INTRODUCTION

3.5 Kit Contents

• GlucoMen® LX PLUS meter

• Carry case

• Battery CR2450, 3V (already installed) 

• User Manual 

• Warranty Card 

• Depending on the version, your set may include additional items 

• Please refer to the box label for the list of contents of your set

3.6 Environmental Conditions

• The storage temperature range for the meter: -25 to 46 °C (-13 to 115 °F)

• The storage temperature range for the sensors: 4 to 30 °C (39.2 to 86 ° F)

• The storage temperature range for the control solution: 2 to 30 °C (35.6 to 86 °F)

• The system operational temperature range: 5 to 45 °C (41 to 113 °F)

• The relative humidity range: 10% to 90% non-condensing

The meter complies with applicable EMC (electromagnetic) emission requirements. However, do not use 

the meter near cellular or cordless telephone, walkie talkies, garage door openers, radio transmitters, or 

any other electrical or electronical equipment that are sources of electromagnetic radiation, as these may 

interfere with the operation of the meter. 

3. INTRODUCTION

Summary of Contents for Glucomen LX PLUS

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands