manualshive.com logo in svg

A. Menarini Diagnostics Glucomen LX PLUS, User Manual

Share
Download
A. Menarini Diagnostics Glucomen LX PLUS User Manual Download Page 32

32

GlucoMen LX PLUS - 42338 - 09/10

UK

6. GLUCOSE TESTING

6.3 Obtaining and Applying a Blood Sample from Forearm or Palm (Glucose Testing 

Only)

 The GlucoMen® LX PLUS significantly reduces the pain of blood glucose 

monitoring by requiring blood samples as small as 0.3 µL only. 

The GlucoMen® LX PLUS additionally offers the possibility to test blood 

glucose at sites other than the finger (i.e., forearm and palm). These sites have 

fewer nerve endings than fingers, hence the pain associated to sampling is 

further reduced.

a. Select the forearm, palm heel or palm side test site in the highlighted areas 

as shown. The area should be free from visible veins, moles and hair and away 

from the bone.

b. Wash area with warm, soapy water. Rinse and dry completely before 

lancing the site.

c. Attach the clear cap to the lancing device. Press and hold the lancing device 

FIRMLY against the forearm (or palm). 

6. GLUCOSE TESTING

Summary of Contents for Glucomen LX PLUS

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands