8x8 Inc 6753i User Manual Download

Page: 75 / 125

— Model 6753i Series IP Phone User Guide

Managing Calls

Press the

Delete

Key again to erase all entries from the Directory List.

The "

Directory empty

" prompt displays.

Saving an Entry to the Directory List

You can save entries (names and numbers) from other sources to your Directory
using any of the following methods:

• Saving from the Display

• Saving from the Caller List

• Saving from the Redial List

Saving from the Display

You can save the name and/or number displayed on your screen during a call to
the Directory List, or to one of your programmable keys using the following
procedure. Use the following illustration as a reference.

Press the

Save

Key during the call.

Press the

Directory

Key or an empty programmable key. If a name is displayed

both the number and name are saved in the Directory List or the programma-
ble key. If no name or "

Unknown Name

" displays, you can enter the name

using the dialpad.

IP Phone UI

Directory empty
Use Save to add

Goodbye

Options

Hold

Redial

Line 3

Line 2

Line 1

Speaker/
Heading

Mute

Save Key

Directory
Key

Save to?
John Burns
9054550055

Summary of Contents for 6753i






























































































































Search results

Summary of Contents for 6753i

Reviews:

Related manuals for 6753i

Brands by name

Popular brands

8x8 Inc 6753i, User Manual

Search results

Summary of Contents for 6753i

Reviews:

Related manuals for 6753i

Brands by name

Popular brands