8x8 Inc 6753i User Manual Download

Page: 61 / 125

— Model 6753i Series IP Phone User Guide

Making Calls

Accessing the Redial List

If you are off-hook and press

, the telephone automatically dials the

last number you called.

If you are not on the phone, press

to display the most recently dialed

number and use

and

to scroll through the list to view the

other numbers.

Press

to see the second most recently dialed number, or

to see the

oldest call on your list.

To dial the displayed number press

, or lift the Handset or press any

line key.

Press

or the

key to cancel.

Deleting from the Redial List

Delete All Items

Press .

Press the

Delete

Key, then press the

Delete

Key again at the prompt to erase

all items.

IP Phone UI

Note:

The redial list is available during active calls. It also stores up to the

last 100 numbers you called, allowing you to scroll through and
select the number you wish to redial.

Note:

You cannot delete individual entries in the Redial List.

IP Phone UI

Redial

Speaker/

Headset

Goodbye

Redial

DELETE again to

erase all items

Redial List is

empty

Summary of Contents for 6753i






























































































































Search results

Summary of Contents for 6753i

Reviews:

Related manuals for 6753i

Brands by name

Popular brands

8x8 Inc 6753i, User Manual

Search results

Summary of Contents for 6753i

Reviews:

Related manuals for 6753i

Brands by name

Popular brands