Model 6753i Series IP Phone User Guide
—
7
Getting Started
When more than one status message displays, the
i
s shown after the
message to indicate you can use the
and
navigation keys to scroll
through the remaining messages.
Incomplete Configuration
If your phone displays an "
Incomplete Config
" message without any extension
or user name at the end of the start up sequence instead of an Idle state screen,
this indicates the phone configuration that was downloaded from the
configuration server is not complete or correct. Contact your System
Administrator for assistance.
No Service
When the phone is not properly connected to the network, or the account
has not been configured by the Network Administrator, the "
No Service
" or
"
Network Disconnected
" prompt appears on the display and the telephone
status light turns
ON
. The phone also displays the default time and date of
12:00am Jan. 1st, 2000. Check that the cables are tightly connected to the
phone and to the wall jack. The phone should automatically detect when the
connection is reconnected and display the "
Network Connected
"
prompt temporarily.
If changes have been made to your phone settings, you may need to restart your
phone. For more information on restarting your phone, see
"Restarting your
phone"
on
page 31
.
For more information about connecting your phone, refer to the
8x8 6753i User
Reference Manual
. Check with your System Administrator for assistance.
John Burns
CFWD All
Jun 8 2:55pm
1
Network Connected
2
