98
— Model 6753i Series IP Phone User Guide
A
ddi
tional
Features
Status Scroll Delay
Using the 8x8 Web Phone UI, you can specify a scroll delay option that allows
you to set the time delay, in seconds, between the scrolling of each status
message on the phone. You can specify this setting in the
Status Scroll Delay
(seconds)
field at the path
Basic Settings->Preferences->General
. The default
time is 5 seconds for each message to display before scrolling to the next
message. You can increase or decrease this time as required. Setting and saving
the value in the 8x8 Web Phone UI applies to the phone immediately.
Configuring Status Scroll Delay
Use the following procedures to specify a status scroll delay on the IP phone.
1.
Click on
Basic Settings->Preferences->General
.
2.
Enter a value in the "
Status Scroll Delay (seconds)
" field.
Valid values are:
1 to 25 seconds. Default is 5
.
3.
Click
to save your settings.
Incoming Call Interrupts Dialing
If you are dialing a call on your phone and another call comes in while you are
dialing, you can allow the incoming call to interrupt dialing by enabling a
parameter called "
Incoming Call Interrupts Dialing
". You can enable or disable
this parameter in the 8x8 Web Phone UI at the path
Basic
Settings->Preferences->General
.
When you enable this field in the 8x8 Web Phone UI, an incoming call
automatically interrupts the outgoing call during dialing and allows the phone to
ring for you to answer the incoming call.
When you disable this parameter, which is the default, the phone does not
interrupt the outgoing call during dialing and instead rings the incoming call on
another free line (or sends busy signal if all remaining lines are busy). You have a
choice to ignore the incoming call, or answer the incoming call on another line. If
8x8 Web Phone UI
