Model 6753i Series IP Phone User Guide
—
105
Ad
dition
al Fe
atu
r
es
3.
The
Microphone Mute
field is enabled by default. The microphone is muted
on the IP phone for Intercom calls made by the originating caller. To disable
this field, uncheck the box.
4.
The
Play Warning Tone
field is enabled by default. If “Auto-Answer” is
enabled, the phone plays a warning tone when it receives in incoming inter-
com call. To disable this field, uncheck the box.
5.
The
Allow Barge In
field is disabled by default. If
Allow Barge In
is enabled,
the phone puts an active call on hold and answers the incoming Intercom call.
To enable this field, check the box.
6.
To enable this field, check the box. Click
to save your settings.
Using Redial Key for “Last Number Redial”
The IP phone has an enhanced redial user interface that allows a user to quickly
redial the last number that was dialed out from the phone. You can:
• Press the REDIAL button twice to redial the last number dialed.
• Press the REDIAL button once, scroll the list of numbers, then press the
REDIAL button again to dial the number that displays on the screen.
The
last number redial
feature for the Redial key is static and is
not configurable.
Customizable Callers List Key
Your System Administrator can specify an XML URI that creates a custom
Callers List application for your phone. When you press the Callers List key, the
phone accesses a custom XML URI Callers List instead of the standard Callers
List. Contact your System Administrator for more information.
Autodial (Hotline and Warmline)
Your System Administrator can configure an autodial feature on your phone. If
autodial is enabled, the phone automatically dials a preconfigured number
whenever it is off-hook. Depending on the configuration specified by your
Administrator, the Autodial functions as either a “hotline”, or as a “warmline,” as
follows:
• Hotline: The IP phone immediately dials a preconfigured number when you
lift the handset.
• Warmline: The IP phone waits for a specified amount of time after you lift the
handset before dialing a preconfigured number. If you do not dial a number
within the time allotted, then the IP phone begins to dial the number.
The Autodial feature is available on a global or per-line basis. Contact your
System Administrator for more information.
Note:
1.
Any speeddial numbers that you configure on your IP phone are not
affected by autodial settings.
2.
If Autodial is configured on your phone, any lines that function as hotlines
do not accept conference calls, transferred calls, and/or intercom calls.
