manualshive.com logo in svg

8x8 Inc 6753i, User Manual

Share
Download
8x8 Inc 6753i User Manual Download Page 104

Model 6753i Series IP Phone User Guide

 

—

 99

Ad

dition

al Fe

atu

r

es

you choose to answer the incoming call, you can answer the call, finish the call, 
and then hang up. You can still go back to the original outgoing call and finish 
dialing out.

Configuring Incoming Call Interrupts Dialing

Use the following procedures to configure "Incoming Call Interrupts Dialing" on 

the IP Phone.

1.

Click on 

Basic Settings->Preferences->General

.

2.

Enable the 

Incoming Call Interrupts Dialing

 field by checking the check box

. 

(

Disable this field by unchecking the box

).

 Default is disabled.

3.

Click 

 to save your settings.

Note: 

:

1. 

On a 6753i, you must use the down arrow key to ignore the call. To 

answer the call you must press the line key where the call is coming in.

2

. If you disable this field, and the phone receives an incoming call while 

you are dialing an outgoing call, you can pick up the call and perform 
transfer or conference as required.

8x8 Web Phone UI

Note: Incoming Call Interrupts Dialing

 is disabled by default.

Summary of Contents for 6753i






























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands