5DT Data Glove Ultra Series User Manual Download

Page: 59 / 60

int fdGetFWVersionMajor(fdGlove *pFG)

Obtains the major version of the glove’s firmware.

Return value

Returns the major version of the glove’s firmware as an integer.

Parameters

pFG

Pointer to a glove device. This is the value returned by

fdOpen()

Remarks

This function has currently only been implemented for the Data Glove 14 Ultra.
It will return 0 if the glove type isn’t a Data Glove 14 Ultra variant. Example: if
the firmware version is 3.2 then 3 is returned.

int fdGetFWVersionMinor(fdGlove *pFG)

Obtains the minor version of the glove’s firmware.

Return value

Returns the minor version of the glove’s firmware as an integer.

Parameters

pFG

Pointer to a glove device. This is the value returned by

fdOpen()

Remarks

bool fdGetAutoCalibrate(fdGlove *pFG)

Indicates if the driver is currently auto calibrating.

Return value

Returns

true

if the driver is currently auto calibrating.

Parameters

pFG

Pointer to a glove device. This is the value returned by

fdOpen()

Remarks

None.

bool fdSetAutoCalibrate(fdGlove *pFG, bool bAutoCalibrate)

Turns auto calibration

off

Return value

Returns

true

if the driver is currently auto calibrating.

Parameters

pFG

Summary of Contents for Data Glove Ultra Series





























































Search results

Summary of Contents for Data Glove Ultra Series

Reviews:

Related manuals for Data Glove Ultra Series

Brands by name

Popular brands

5DT Data Glove Ultra Series, User Manual

Search results

Summary of Contents for Data Glove Ultra Series

Reviews:

Related manuals for Data Glove Ultra Series

Brands by name

Popular brands