5DT Data Glove Ultra Series User Manual Download

Page: 9 / 60

4. Using GloveManager

The 5DT GloveManager is a useful tool accompanying the Data Glove which
may be used for the following:

•

Testing the 5DT Data Glove

•

Obtaining good calibrated values for the 5DT Data Glove

•

Logging data obtained from the 5DT Data Glove

Note: All images are shown for the Data Glove 14 Ultra. Images will differ
slightly for the Data Glove 5 Ultra.

4.1. Starting GloveManager

Start the program by running GloveManager.exe, which is installed in the

\Data Glove Ultra\GloveManager\

folder by default. The setup tab window will

appear (see below).

Figure 2 – The Setup Tab Window

4.2. Opening USB Gloves

4.2.1 Scanning for Gloves

Clicking the

button in the setup tab window causes GloveManager to

scan the USB for available gloves. This is useful if you have plugged in the

Summary of Contents for Data Glove Ultra Series





























































Search results

Summary of Contents for Data Glove Ultra Series

Reviews:

Related manuals for Data Glove Ultra Series

Brands by name

Popular brands

5DT Data Glove Ultra Series, User Manual

Search results

Summary of Contents for Data Glove Ultra Series

Reviews:

Related manuals for Data Glove Ultra Series

Brands by name

Popular brands