23
Figure 28 - Result of the Second Port Scan
4. The second glove is opened by selecting the correct port and clicking on
the
Online
check box.
Figure 29 - Glove B has been Opened
5.4. Calibration
You may use auto calibration to calibrate the glove, but it is recommended that
you use the pre-defined calibration steps.
To use auto calibration, click on the
Auto Calib
button. The button text will
change to
Click to Stop
. Once you are satisfied with the calibration values,
click the button again to stop calibrating.
The following calibration process is recommended.
1. Hold your hand in a relaxed, open position, and click on the
Relax Open
button.
2. Open all of your fingers as wide as possible and click on the
Wide Open
button.
3. Close all of your fingers (except your thumb) and click on the
Finger
Close
button.
4. Close your thumb and click on the
Thumb Close
button.
5. Calibration is now complete.
