Drive Information page
www.3ware.com
195
Drive Information page
Figure 93. Drive Information Page
The Drive Information page appears when you choose
Information > Drive
Information
from the menu bar, or when you click a port # on the Unit Details
page. If you arrive at this page from the port # hyperlink on the Unit
Information page, the line showing the port # you clicked on is highlighted.
This page shows a list of drives on the current controller and a summary of
each one.
To see additional detail about a particular drive in the Drive Details window,
including the SMART data, whether NCQ is supported and enabled, and the
SATA Link speed, click the link in the Port # column.
Port #.
The port to which the drive is connected.
Model.
The model of the drive.
Capacity.
The physical capacity of the drive. (Note that the capacity as shown
on 3DM screen is calculated as 1KB = 1024. This amount may differ from the
capacity that is printed on the disk drive, where it typically has been
calculated as 1K = 1000. Consequently, the capacity of the drive may appear
smaller in the 3DM screens. No storage capacity is actually lost; the size has
simply been calculated differently for consistency.)
Serial #.
The serial number of the drive.
Firmware.
The firmware version of the drive.
Unit.
The unit the drive belongs to, if applicable.
Status.
The status of the drive: OK, Not Supported, Not Present, and so forth.
If you need help regarding a status displayed here, please contact Technical
Support. For more information, see “Drive Statuses” on page 142.
