User manual
46
www.3onedata.com
（
Figure 6.7.4
）
Please operate the operating system in accordance with the following attention if you did not find the
option to verify. When using the remote RADIUS server, please configure that all switch ports connected
to each other and the ports of connected directly with the server to be mandatory certification, the 802.1X
authentication is disabled.
Between the applicant and the authentication system using the MD5-Challenge, other methods do not support
network connection without "authentication" option, Please select "Accessories" -> "Administrative Tools" ->
"Component Services" -> "Service", set the "Wired AutoConfig" to "automatic" billing server, if the setting is
incorrectly will also result in the applicant cannot pass authentication. We do not need to set the appropriate port as
the uplink port if don't have billing system, the default is authenticated, the user can not set up, all uplink ports or
downlink ports must be forced to certificate, be "prohibit the use of certification", or cannot use the remote server,
the administrator have to make sure that the device can access the remote server if use the remote server, the
device address of the gateway settings are correct, if you use the domain name, the DNS must be set correctly.
