User manual
37
www.3onedata.com
105 switch belong to two different ring network group, so the network mark of ring network group
must different.
6.6.2.3
Ring V3 Coupling Configuration
Coupling ring structure figure as 6.6.8:
Coupling
（
Figure 6.6.8
）
Operating method:
1. Enable Ring Group 1 and Ring Group 2; (Hello_time can be disable too, if it enable, time of sending
Hello packet could not be very fast, or it will influence CPU dealing speed.);
2. Set up Port 1 and 2 of Device 105, 106 to be Ring Ports in Ring Group 1, Network ID is 1, Ring Type
Single; Set up Port 4 of device to be Coupling Port in Ring Group 2, Coupling Control Port is 2, Network
ID is 3, and Ring Type is Couple. As shown in figure 6.6.9:
（
Figure 6.6.9
）
3. Set up Port 4 and 5 of Device 100, 101 to be Ring Ports in Ring Group 1, Network ID is 2, Ring Type
is Single; Set up Port 1 of device to be Coupling Port in Ring Group 2 , Coupling Control Port is Port 4,
Network ID is 3, Ring type is Couple, as shown in figure 6.6.10.
