3onedata IES6116 Series User Manual Download Page 21

Page: 21 / 80

User manual

www.3onedata.com

The default username and password is [admin]

，

case sensitive for this series. The default password

is with administrator privileges.

Menu Introduction:

Main Menu

Tag

Function

System Status

Overview

Display device information and port information such as software

version, IP address, etc.

Port

Configuration

Port Settings

Display and configure information of each port: such as connection

status, configuration modes, flow status etc.

Bandwidth

Management

Set the maximum rate of the input/output packets for port.

Storm

Suppression

Set storm inhibition type and flow

L2 Feature

VLAN

Displays the current list of 802.1Q VLAN, configure and manage

802.1Q VLAN. Display port-based VLAN list, and to configure and

manage port-based VLAN.

Dynamic

Multicast

IGMP snooping and dynamic GMRP multicast registration.

Static Multicast

Configure the static multicast MAC address and its corresponding

port.

QOS

QoS

Classification

Configure the QOS queue mode, QOS implementation and port

default priority.

Cos Mapping

Configure the meaning of COS value.

Tos/Diffserv

Mapping

Configure the DSCP priority. Mapping Table of ToS(DSCP) Value

and Priority Queues

Redundancy

Rapid Ring

Configure the rapid ring network port and type. Include Ring V3 and

RSTP.

Port Trunking

Configure port trunking group.

Access

Control

Configure different permissions for the user name and password.

Access Profile

Set up a login mode and allow access to IP.

IEEE 802.1X

Configure 802.1x authentication

802,1X User

Display the different permission for username.

Static Unicast

FWD

Configure static unicast address and the corresponding port.

Remote

Monitoring

SNMP

Configuration

Configure the parameters of SNMP

Rmon

Set the Rmon related information configuration

Email Warning

Configure the mail server, recipient and other parameters.

Relay Warning

Port Statistics

Rx Frame

Tx Frame

Traffic Statistics

Display amount transfer and receive packets of the port

Summary of Contents for IES6116 Series

















































































Search results

Summary of Contents for IES6116 Series

Reviews:

Brands by name

Popular brands

3onedata IES6116 Series, User Manual

Search results

Summary of Contents for IES6116 Series

Reviews:

Brands by name

Popular brands