User manual
25
www.3onedata.com
6.4.2 IEEE 802.1Q VLAN
Main function of IEEE 802.1Q VLAN is the VLAN tag. The tag including VLAN information can insert
in the Ethernet frame. The device transmits the data according its transmission rules. VLAN tag protocol
in the data frame is 2 byte; the number is 0x8100.
（
Figure 6.4.2
）
1. Add Item
1. File in VLAN item in 802.1Q VID (Range: 1-4094);
2. Choice port and add into VLAN table, if do not choice the port, it displayed “-” on right side, “U”
means the port will be added in VLAN table and no tag of the egress frame. “T” means the port will be
added in VLAN table and no need tag the egress frame
3. The default setting of the port is PVID, change the VLAN group member‟s port PVID the same as
VID (For special application, and PVID and VID can be different)
4. Choice“Add/Edit” Button, the VLAN item will be added in VLAN table, Will be replace directly if
there have same VLAN before configuration.
5. Choice “Apply”
2. Delete Item
Delete the item in the table
3. VLAN configuration
：
VLAN identification replace configuration:
（
Figure 6.4.3
）
Manage VLAN ID
：
There must have members in VLAN, can access switch regularly through VLAN group members.
